Ferrara Fire Apparatus, Inc.: Safety Recalls in 2018

Updated on March 19, 2026.

There were 3 safety recalls made by Ferrara Fire Apparatus, Inc. in 2018. See the details of the recalls below.

You can also see similar information for other manufacturers.

Data Source: NHTSA.

See this for other years:

September 11, 2018

(Campaign #: NR (Not Reported))

Brake Light may Randomly Illuminate/FMVSS 108

Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2017-2019 Ferrara Inferno, Igniter, Cinder, Ultra, and Intruder emergency vehicles equipped with Whelen accessory brake lights. Depending on the specific wiring of the vehicle, these brake lights may illuminate when the brake pedal has not been pressed. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."

NHTSA ID: 18V613000

Component: EXTERIOR LIGHTING

# of Units Affected: 108

Consequence Summary:

If the brake lights incorrectly illuminate, it can confuse other drivers, possibly increasing the risk of a crash.

Corrective Action:

Ferrara will notify owners, and dealers will replace the brake lights, free of charge. The recall began November 1, 2018. Owners may contact Ferrara customer service at 1-800-443-9006.

Park Outside Advisory: No

Do not Drive Advisory: No

Completion Rate (%): 80.58

View Full Recall Details

March 14, 2018

(Campaign #: NR (Not Reported))

Front Axle Spindle may Fracture

Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2004-2012 Inferno and Igniter emergency vehicles, equipped with Timoney Independent Front Suspensions. Inconsistent machining may result in fatigue cracks developing over time in the front axle spindles, causing failure of the spindle and the possible separation of a front wheel from the vehicle.

NHTSA ID: 18V174000

Component: SUSPENSION

# of Units Affected: 59

Consequence Summary:

A wheel separation from the vehicle can increase the risk of a crash.

Corrective Action:

Ferrara will notify owners, and dealers will replace the front axle spindle, free of charge. The recall began on April 27, 2018. Owners may contact Ferrara customer service at 1-800-443-9006.

Park Outside Advisory: No

Do not Drive Advisory: No

Completion Rate (%): 92.86

View Full Recall Details

February 5, 2018

(Campaign #: NR (Not Reported))

Water Pressure Relief valve may Open

Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2015-2016 Inferno and International 4400, 2013-2016 Igniter, 2014-2017 Cinder and Freightliner M2 106, 2013-2014 Ember and 2013-2017 Kenworth T370 fire-fighting vehicles, equipped with Hale pressure relief valves in the water pumps used for fire fighting. Rings securing the valves may corrode over time after exposure to water, causing the ring to fail and the pressure relief valve to open, reducing the water pressure available for fire fighting.

NHTSA ID: 18V094000

Component:

# of Units Affected: 66

Consequence Summary:

A reduction in water pressure may hinder fire fighting efforts, increasing the risk of injury.

Corrective Action:

Ferrara will notify owners, and Ferrara certified dealers or technicians will replace the relief valve retaining ring with one that is stainless steel, free of charge. The recall began on February 12, 2018. Owners may contact Ferrara customer service at 1-800-443-9006.

Park Outside Advisory: No

Do not Drive Advisory: No

Completion Rate (%): 83.33

View Full Recall Details