Terex South Dakota, Inc.: Safety Recalls in 2022

Updated on March 19, 2026.

There were 5 safety recalls made by Terex South Dakota, Inc. in 2022. See the details of the recalls below.

You can also see similar information for other manufacturers.

Data Source: NHTSA.

See this for other years:

December 2, 2022

(Campaign #: SN715)

Boom Structure Improperly Welded

Terex South Dakota, Inc. (Terex) is recalling certain 2022 C4000, C5000, C6000, C7000, General, and Trans TL vehicles. A seam in the boom structure may have been improperly welded, causing the weld to crack.

NHTSA ID: 22V893000

Component: EQUIPMENT

# of Units Affected: 431

Consequence Summary:

A cracked weld may lead to the boom failing, increasing the risk of an injury.

Corrective Action:

Dealers will replace or repair the boom, free of charge. Owner notification letters were mailed on February 8, 2023. Owners may contact Terex's customer service at 1-605-882-4000. Terex's number for this recall is SN715.

Park Outside Advisory: No

Do not Drive Advisory: No

Completion Rate (%): 74.48

View Full Recall Details

December 1, 2022

(Campaign #: SN714)

Incorrectly Machined Outrigger May Drift

Terex South Dakota, Inc. (Terex) is recalling certain 2022 C4000, Optima TC, and XT Pro outrigger vehicles. The outrigger cylinder may have been machined incorrectly, which can cause the lock valve cartridge seals to fail, allowing the cylinder to drift.

NHTSA ID: 22V888000

Component: EQUIPMENT

# of Units Affected: 40

Consequence Summary:

A drifting cylinder may result in the machine tipping, increasing the risk of injury.

Corrective Action:

Dealers will replace the cylinders, free of charge. All affected vehicles were inspected and remedied by December 22, 2022. Owners may contact Terex's customer service at 1-605-882-4000. Terex's number for this recall is SN714.

Park Outside Advisory: No

Do not Drive Advisory: No

Completion Rate (%): 100

View Full Recall Details

September 8, 2022

(Campaign #: SN712)

Platform Leveling Cylinder Support Welds Failure

Terex South Dakota, Inc. (Terex) is recalling certain 2019-2022 TL80, TL80/112, and TL100 aerial devices. The welds for the platform leveling cylinder support bosses may crack, which can cause the cylinder support pin to fail and allow the platform to tip.

NHTSA ID: 22V674000

Component: EQUIPMENT

# of Units Affected: 194

Consequence Summary:

A platform that tips during use increases the risk of an injury.

Corrective Action:

Dealers will install reinforcement plates to the boom tip platform leveling cylinder bosses, and, all TL80/112 aerial devices will have the hydraulic storage latch for the elevator replaced, free of charge. Owner notification letters were mailed on October 13, 2022. Owners may contact Terex's customer service at 1-605-882-4000. Terex's number for this recall is SN712.

Park Outside Advisory: No

Do not Drive Advisory: No

Completion Rate (%): 86.6

View Full Recall Details

March 31, 2022

(Campaign #: SN710)

Aerial Device Pivot Points Improperly Lubricated

Terex South Dakota, Inc. (Terex) is recalling certain 2020-2022 XT Pro aerial devices. The pivot points may not have been lubricated during assembly, which can cause the pins to seize and break the pin retainers.

NHTSA ID: 22V213000

Component: EQUIPMENT

# of Units Affected: 1,359

Consequence Summary:

Pin retainer failure may cause the boom to fall, increasing the risk of an injury.

Corrective Action:

Dealers will inspect and lubricate all pivot points, if necessary, free of charge. Owner notification letters are expected to be mailed on April 29, 2022. Owners may Terex's customer service at 1-605-882-4000. Terex's number for this recall is SN710.

Park Outside Advisory: No

Do not Drive Advisory: No

Completion Rate (%): 29.51

View Full Recall Details

March 8, 2022

(Campaign #: SN708)

Emergency Stop Controls Malfunction

Terex South Dakota, Inc. (Terex) is recalling certain 2016-2021 OM, Optima-HRX, and TCX aerial devices with dual platforms. The upper control stations' emergency stop controls may not stop all boom functions, resulting in unintended boom movement.

NHTSA ID: 22V138000

Component: EQUIPMENT

# of Units Affected: 17

Consequence Summary:

Unintended boom movement increases the risk of injury.

Corrective Action:

Dealers will install engine stop/start controls at both control stations, as necessary, and install placards, free of charge. Owner notification letters were mailed on April 13, 2022. Owners may contact Terex's customer service at 1-605-882-4000. Terex's number for this recall is SN708.

Park Outside Advisory: No

Do not Drive Advisory: No

Completion Rate (%): 70.59

View Full Recall Details