CPSC Recall in 2004: CPSC, Fluke Corp. Announce Recall of Electrical Testing Components

WASHINGTON, D.C. - In cooperation with the U.S. Consumer Product Safety Commission, Fluke Corporation, of Everett, Wash., is voluntarily recalling about 110,000 Modular Test Leads used for Electrical Testing Multimeters. The leads, which are used to connect probes to handheld digital multimeters when testing for the presence and amount of voltage present in electrical circuitry, can result in incorrect multimeter readings. This poses a serious shock or electrocution hazard if the consumer touches live wires that the meter has read as having no electrical current.Name of product: Modular Test Leads used for Electrical Testing MultimetersUnits: About 110,000Manufacturer: Fluke Corporation, of Everett, Wash.Hazard: The leads, which are used to connect probes to handheld digital multimeters when testing for the presence and amount of voltage present in electrical circuitry, can result in incorrect multimeter readings. This poses a serious shock or electrocution hazard if the consumer touches live wires that the meter has read as having no electrical current. Fluke has received 29 reports of the leads for Fluke multimeters operating improperly, though no injuries have been reported.Incidents/Injuries: Fluke has received 29 reports of the leads for Fluke multimeters operating improperly, though no injuries have been reported.Description: The recalled test leads are red and black with no permanent probes attached. They have the Fluke logo on the connector ends. They were sold individually, as well as with a variety of Fluke multimeters and accessory kits. The recall includes only Fluke Model TL221, TL222 and TL224 test leads. The model numbers are not written on the test leads, but are written on the packaging or on product documents. The recall does not include Fluke test leads with permanently attached test probes, and does not include test leads with a SureGrip™ symbol, shown below, either on a tag around the silicon wire or molded onto the connector end. Fluke test leads with a SureGrip™ symbol are not included in the recall.Sold at: Home and hardware stores and electrical distributors nationwide from December 2002 through March 2004. The leads sold individually for about $18. Fluke multimeters and accessory kits containing these leads sold for between $45 and $450.Manufactured in: ChinaRemedy: Consumers should stop using the recalled modular test leads immediately and contact Fluke for information on getting free replacement components.Consumer Contact: Consumers should call Fluke toll-free at (888) 401-9940 between 5 a.m. and 4 pm PT Monday through Friday. Consumers also can access Fluke's website at www.fluke.com. Fluke has sent direct notice to known purchasers.

The leads, which are used to connect probes to handheld digital multimeters when testing for the presence and amount of voltage present in electrical circuitry, can result in incorrect multimeter readings. This poses a serious shock or electrocution hazard if the consumer touches live wires that the meter has read as having no electrical current. Fluke has received 29 reports of the leads for Fluke multimeters operating improperly, though no injuries have been reported.

Replace

Fluke has received 29 reports of the leads for Fluke multimeters operating improperly, though no injuries have been reported.

Home and hardware stores and electrical distributors nationwide from December 2002 through March 2004. The leads sold individually for about $18. Fluke multimeters and accessory kits containing these leads sold for between $45 and $450.

China