CPSC Recall in 2004: CPSC, Ocean Management Systems Announce Recall of SCUBA Manifolds

In cooperation with the U.S. Consumer Product Safety Commission (CPSC), Ocean Management Systems, Inc., of Middletown, NY. is voluntarily recalling about 140 rotating cross bar SCUBA Manifolds. Undersized o-rings installed on the cross bar can cause a loss of breathing air from the SCUBA cylinder, presenting a risk of drowning.Name of Product: Rotating Cross Bar SCUBA ManifoldUnits: About 140Importer: Ocean Management Systems, Inc., of Middletown, NY.Hazard: Undersized o-rings installed on the cross bar can cause a loss of breathing air from the SCUBA cylinder, presenting a risk of drowning.Incidents/Injuries: There has been one report of breathing air leaking from a cylinder. No injuries have been reported.Description: The recall involves the 200 and 300 Bar versions of the OMS Rotating Cross Bar Manifold. The manifold consists of two valves which have "O.M.S." stamped on the side of each valve and a crossbar that has three O-rings per side. Each part has a black plastic knob.Sold at: Dive stores nationwide from December 2003 through September 2004 for about $238.Manufactured in: ItalyRemedy: Affected units will be replaced at no cost to the consumer.Consumer Contact: Affected consumers are being contacted directly by OMS to arrange for a free replacement. Consumers with affected products who have not been contacted should call OMS at 845-692-3600 between 9 a.m. and 5 p.m. ET Monday through Friday or send an e-mail to kim@omsdive.com.

Undersized o-rings installed on the cross bar can cause a loss of breathing air from the SCUBA cylinder, presenting a risk of drowning.

Replace

There has been one report of breathing air leaking from a cylinder. No injuries have been reported.

Dive stores nationwide from December 2003 through September 2004 for about $238.

Italy