CPSC Recall in 2006: Safety Alert: Robert Bosch Tool Corp. Abrasive Cut-Off Wheels Lack Safety Warning Label

Updated on March 25, 2026.

See the recall details below. You can also see similar information for other consumer product recalls in 2006.

Data Source: CPSC.

Recall Number: 06-184

Date: June 08, 2006

Product Name: Vermont American® Abrasive Cut-Off Wheels

Recall Description:

WASHINGTON, D.C. - In cooperation with the U.S. Consumer Product Safety Commission (CPSC), Robert Bosch Tool Corp., Mt. Prospect, Ill., is voluntarily recalling about 400,000 Vermont American Abrasive Cut-Off Wheels. The Abrasive Cut-Off Wheel packages are not properly labeled with precautionary information on proper use and operation. The failure of a user to follow the instructions below could result in injury.Name of Product: Vermont American® Abrasive Cut-Off WheelsUnits: About 400,000Manufacturer: Robert Bosch Tool Corp., Mt. Prospect, Ill.Hazard: The Abrasive Cut-Off Wheel packages are not properly labeled with precautionary information on proper use and operation. The failure of a user to follow the instructions below could result in injury."! WARNING Read, understand and comply with tool manual before use. Follow OSHA and ANSI B7.1 standards. Use eye, face, dust and ear protection. Wear body apron and gloves. Speed rating of wheel must be greater than tool speed. Do not grind without guard adjusted for maximum operator protection. Mount wheel with the tool flanges provided. Run-in for one minute before application. Do not jam, twist or pinch wheel in work piece or apply excessive side pressure to the wheel. RECOIL may occur if wheel is jammed. Do not use near flammable materials or gases; fire or explosion may result. Do not expose to water, condensation or freezing. Discard wheel if dropped, cracked or chipped."Incidents/Injuries: None reported.Description: The wheels have a black, abrasive exterior; a red circular label on the interior; and are used to clean, slot, nick and cut metal. The wheels were sold under the "Vermont American" brand name had the following catalog numbers, diameters and blade thickness:Item #DiameterBlade Thickness280266-1/2"1/8"280277"-7-1/4"1/8"280288"1/8"2803010"1/8"2803212"1/8"2803314"1/8"Sold at: Industrial distributors nationwide from January 2001 through September 2005 for between $5 and $15.Manufactured In: CanadaRemedy: Consumers with abrasive cut-off wheels that are missing the safety instructions should contact Vermont American Customer Service to obtain safety warning information.Consumer Contact: Call Robert Bosch Tool Corp. at (800) 742-3869 between 7 a.m. and 7 p.m. CT Monday thru Friday.

Hazard Description:

The Abrasive Cut-Off Wheel packages are not properly labeled with precautionary information on proper use and operation. The failure of a user to follow the instructions could result in injury.

Consumer Action:

Remedy Type:

Label, New Instructions

Units: About 400,000

Incidents:

None reported.

Sold At:

Industrial distributors nationwide from January 2001 through September 2005 for between $5 and $15.

Manufactured In:

Canada