CPSC Recall in 2009: Single Meter Sockets Recalled by Milbank Manufacturing Due to Fire and Electrocution Hazards

Updated on January 18, 2026.

See the recall details below. You can also see similar information for other consumer product recalls in 2009.

Data Source: CPSC.

Recall Number: 10-012

Date: October 14, 2009

Product Name: Single Meter Sockets

Recall Description:

The single meter 200 amp/4 terminal sockets are used for underground utility meter installations. The meter socket is 20 3/4 inches high by 9 inches wide and 4 1/2 inches deep with 1 meter position. It is used by the approving utility to mount their electric meter to measure how much electricity a residence uses. It can be used for an underground residential application. The recalled model number 9090 appears on the right or left side of the installed meter socket. If not installed, model numbers U9090-O or R9090-O will appear on the label on the outside of the box.

Hazard Description:

A short may occur while in use due to an incorrect bridge installed in the product, to which the meter clips are attached. If the manufacturing defect exists, all metal parts of the meter could create a shock or burns can occur if the cover is off and the meter socket is energized.

Consumer Action:

Remedy Type:

Refund, Replace

Units: About 1,400

Incidents:

Three incidents have been reported of the unit shorting out. No injuries were reported.

Sold At:

Electrical supply distributors in N.Y., Pa., Vt. and Mass. and at local hardware stores in N.Y. from May 2009 through August 2009 for about $70.

Manufactured In:

United States