INTERNATIONAL TRUCK & ENGINE CORPORATION: Safety Recalls in 2001

VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS. THESE VEHICLES COULD EXPERIENCE A LOSS OF THE LOW BEAM HEADLIGHTS, THE HIGH BEAM HEADLIGHTS, OR BOTH. A SOFTWARE PROBLEM WITHIN THE ELECTRICAL SYSTEM CONTROLLER (ESC) CAN CAUSE THE CIRCUIT FOR THE LOW BEAM OR THE CIRCUIT FOR THE HIGH BEAM HEADLIGHTS TO FUSE OR OPEN, RESULTING IN LOSS OF EITHER THE LOW OR HIGH BEAM HEADLIGHTS OR POSSIBLY EVEN BOTH.

VEHICLE DESCRIPTION: CERTAIN HEAVY DUTY TRUCKS FAIL TO COMPLY WITH REQUIREMENTS OF FMVSS NO. 121, "AIR BRAKE SYSTEMS." A SECONDARY BRAKE LINE THAT CONNECTS THE FOOT VALVE WITH THE SPRING BRAKE VALVE MAY NOT HAVE BEEN INSTALLED.

VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS. THE STEERING SHAFTS MAY HAVE A DEFECTIVE OR MIS-LOCATED WELD THAT COULD FAIL.

VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH AXLE ASSEMBLIES WHICH MAY HAVE BEEN MANUFACTURED WITH TRW MODEL 20EDL BALL SOCKETS/DRAG LINKS. THE TIE ROD BALL-SOCKET BEARINGS HAVE A BELOW SPECIFICATION CASE DEPTH AND/OR HARDNESS WHICH CAN LEAD TO PREMATURE WEAR OUT OF THE SOCKET IN SOME APPLICATIONS.

VEHICLE DESCRIPTION: IN BELOW FREEZING OPERATING CONDITIONS, THE AIR-PRESSURE ACTUATED BRAKE LIGHT SWITCH THAT IS MOUNTED OUTSIDE THE CAB ON THE FRONT COWL, ON CERTAIN HEAVY DUTY TRUCKS, MAY NOT ACTIVATE DURING LIGHT TO NORMAL BRAKING.

VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS. THERE IS AN ELECTRICAL PROBLEM WITH A REMOTE POWER MODULE. THESE VEHICLES WERE BUILT WITH THE ABILITY TO ADD SIX REMOTE SWITCHES PER MODULE, WHICH ARE MOUNTED OUTSIDE THE CAB AND ARE USED TO TURN ON AND OFF CIRCUITS THAT PERFORM CUSTOM ELECTRICAL FUNCTIONS. IF TWO OR MORE REMOTE SWITCHES ARE ACTUATED ON WITHIN 100MS OF ONE ANOTHER, ALL SIX OF THE OUTPUTS ON THE REMOTE POWER MODULE WILL TURN ON. IF TWO OR MORE REMOTE SWITCHES ARE ACTUATED OFF WITH 100MS OF ONE ANOTHER, ALL SIX OF THE OUTPUTS ON THE REMOTE POWER MODULE WITH TURN OFF.

VEHICLE DESCRIPTION: HEAVY DUTY VEHICLES EQUIPPED WITH A 20,000 POUND RATED DANA I-200 FRONT STEER AXLES. THERE ARE VISIBLE CRACKS IN THE SEAL DIAMETER AND LARGE BEARING DIAMETER ON THE FRONT AXLE KNUCKLES, WHICH CAN REDUCE THE LIFE EXPECTANCY OF THE KNUCKLES.

VEHICLE DESCRIPTION: HEAVY DUTY 6X4 TRUCKS EQUIPPED WITH CHALMERS 800 SERIES SUSPENSION KITS. THESE SUSPENSION KITS MAY HAVE INSUFFICIENT PENETRATION OF THE WELD ATTACHING THE TORQUE ROD EYE TO THE TORQUE ROD TUBE.

VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH BOSTROM DRIVER SEAT MODELS (910, 910SC, OR 914) AND INTERNATIONAL'S PARKING BRAKE CODE 04036. IF SOMEONE OUTSIDE THE CAB ADJUSTS/SLIDES THE DRIVER'S SEAT TO ITS MOST FORWARD POSITION, WITH THE PARKING BRAKE SET, THE SEAT WILL CONTACT AND RELEASE THE PARKING BRAKE LEVER.

VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH TIE ROD ASSEMBLIES CONTAINING 24-DL MODEL BALL SOCKETS AND MANUFACTURED BY TRW. CERTAIN OF THE TIE ROD BALL-SOCKET BEARINGS HAVE A BELOW-SPECIFICATION CASE DEPTH AND/OR HARDNESS, WHICH CAN LEAD TO PREMATURE WEAR OF THE SOCKET.

VEHICLE DESCRIPTION: STRIPPED CHASSIS AND COMMERCIAL BUSES AND SCHOOL BUSES EQUIPPED WITH HYDRAULIC BRAKES AND AUTOMATIC TRANSMISSIONS. THE MISALIGNMENT OF THE BRAKE PEDAL CAN CAUSE DELAYED BRAKE LIGHT ACTIVATION DURING LIGHT BRAKING APPLICATIONS.

VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH AIR BRAKE HALDEX AUTOMATIC SLACK ADJUSTERS, LONG STROKE BRAKE CHAMBERS, AND DANA BRAKES. THE AUTOMATIC SLACK ADJUSTER ANCHOR BRACKETS CAN FAIL DUE TO FATIGUE FRACTURE AND COMPLETELY SEPARATE, CAUSING THE SLACK ADJUSTERS TO FUNCTION AS MANUAL SLACK ADJUSTERS.